Diagnosing the faults of a hermetically sealed oil filled transformer is a crucial task for ensuring its reliable operation. As a supplier of Hermetically Sealed Oil Filled Transformer, I've dealt with various transformer issues over the years. In this blog, I'll share some practical ways to diagnose these faults, which can help you keep your transformers running smoothly.
Visual Inspection
The first step in diagnosing a hermetically sealed oil filled transformer is a visual check. It might seem simple, but it can reveal a lot. Start by looking at the transformer's exterior. Check for any signs of physical damage, like dents, cracks, or leaks. Oil leaks are particularly concerning as they can lead to a loss of insulation and cooling capacity. If you see oil stains around the transformer or on the ground beneath it, that's a clear indication of a problem.
Also, examine the transformer's connections. Loose or corroded connections can cause overheating and arcing. Make sure all the terminals are tight and there are no signs of discoloration or burning. The bushings, which are the insulators that allow electrical connections to pass through the transformer's tank, should be inspected for cracks or any signs of damage. Any visible damage to the bushings can lead to electrical breakdown and potentially catastrophic failure.
Temperature Monitoring
Temperature is a key indicator of a transformer's health. Overheating can be a sign of various problems, such as overloading, poor cooling, or internal faults. Most hermetically sealed oil filled transformers are equipped with temperature sensors. Regularly monitor the temperature readings and compare them to the manufacturer's specifications.
If you notice that the temperature is consistently higher than normal, it's time to investigate further. Check the cooling system to make sure it's working properly. For Oil Immersed Self Cooled Transformer, ensure that the radiator fins are clean and not blocked. Any blockage can prevent proper heat dissipation.
Oil Analysis
Oil in a hermetically sealed oil filled transformer serves two main purposes: insulation and cooling. Analyzing the oil can provide valuable insights into the transformer's internal condition. Over time, the oil can break down due to heat, electrical stress, and moisture intrusion. This breakdown can release gases and contaminants that can be detected through oil analysis.
There are several types of oil analysis tests you can perform. Dissolved gas analysis (DGA) is one of the most important. It measures the concentration of various gases, such as hydrogen, methane, ethane, ethylene, and acetylene, dissolved in the oil. Different gases are associated with different types of faults. For example, high levels of hydrogen can indicate partial discharges, while elevated levels of ethylene and acetylene can suggest arcing.


Another test is the moisture content analysis. Moisture in the oil can reduce its dielectric strength and increase the risk of electrical breakdown. Regularly test the oil for moisture and take appropriate action if the levels are too high.
Electrical Testing
Electrical testing is an essential part of transformer fault diagnosis. One of the most common electrical tests is the insulation resistance test. This test measures the resistance of the insulation between the transformer's windings and the ground. A low insulation resistance value can indicate insulation degradation or moisture ingress.
Turns ratio testing is another important test. It checks the ratio of the number of turns in the primary winding to the number of turns in the secondary winding. Any significant deviation from the specified turns ratio can indicate a short circuit or an open circuit in the windings.
Sound and Vibration Analysis
Listening to the transformer can sometimes reveal a problem. A normal transformer should produce a steady humming sound. If you hear any unusual noises, such as crackling, buzzing, or rattling, it could be a sign of an internal fault. Crackling noises might indicate partial discharges, while buzzing or rattling could be due to loose components or mechanical vibrations.
Vibration analysis can also be useful. Excessive vibration can be caused by unbalanced loads, mechanical problems, or electrical faults. Use a vibration sensor to monitor the transformer's vibration levels and compare them to the baseline values. If the vibration levels are higher than normal, further investigation is needed.
Monitoring the Pressure
In a hermetically sealed oil filled transformer, the pressure inside the tank is carefully regulated. Monitoring the pressure can help detect leaks or internal faults. A sudden drop in pressure could indicate an oil leak, while a significant increase in pressure might be due to internal arcing or overheating.
Most transformers are equipped with pressure gauges. Regularly check the pressure readings and make sure they are within the normal range. If you notice any abnormal pressure changes, take immediate action to diagnose and fix the problem.
Conclusion
Diagnosing the faults of a hermetically sealed oil filled transformer requires a combination of visual inspection, temperature monitoring, oil analysis, electrical testing, sound and vibration analysis, and pressure monitoring. By regularly performing these diagnostic procedures, you can detect potential problems early and take preventive measures to avoid costly breakdowns.
If you're in the market for a high-quality Hermetically Sealed Oil Filled Transformer or need more information on transformer maintenance and fault diagnosis, we're here to help. Our team of experts can provide you with the best solutions and support. Don't hesitate to reach out and start a conversation about your specific needs.
References
- Electrical Power Transformer Engineering by GeorgeJoseph Thottappillil
- Transformer Maintenance, Testing, and Diagnostics by E. W. Golding and F. C. Worthington
