Jiangsu VKE Transformer Co., Ltd. Conducts Routine Transformer Testing

Nov 03, 2026

Leave a message

2026110311230617510

News profile

 

Recently, in the quality inspection workshop of Jiangsu VKE Transformer Co., Ltd., technical personnel have been carrying out routine performance testing on a batch of oil-immersed transformers slated for delivery, following standardized procedures. The testing regimen encompasses key parameters, including voltage ratio, DC resistance, insulation resistance, no-load and load losses, induced voltage, power-frequency withstand voltage, sealing integrity, and oil analysis.

2026110311230017010

 

In the electrical parameter testing area, technicians utilize an intelligent transformer test system to conduct turns-ratio and DC resistance tests. By verifying the winding turns ratio and measuring the DC resistance of each phase, they can assess circuit connections and the internal condition of the windings. Subsequently, the technicians perform no-load and load tests, recording data on no-load and load losses to evaluate the transformer's operational efficiency.

Technical Parameters

Rated capacity 800kVA Rated voltage 10/0.4kV
Phase 3 Tap changer ±2×2.5%

Vector Group

Dyn11 Impedance 4.5%
Serial number 2609082 Picture number 1BH13

 

 

 

During the insulation performance testing phase, on-site personnel conducted insulation resistance tests, induced voltage withstand tests, and power-frequency voltage withstand tests to verify the insulation strength between the windings and the iron core. For oil-immersed transformers, technical staff collected insulating oil samples for laboratory analysis; by measuring parameters such as breakdown voltage, moisture content, and closed-cup flash point, they evaluated the insulating properties of the oil. Simultaneously, units with a fully sealed design underwent sealing tests, where pressure was applied and all sealing surfaces were inspected to ensure there were no leaks.

2026110311225916910

 

 
Production Process
 
1Preparation of Materials
Preparation of Materials
2Core Fabrication
Core Fabrication
3Coil Winding
Coil Winding
4Assembly
Assembly
5Vacuum drying
5cuum drying
6Testing
Testing
7Packaging
Packaging
8Transportation
Transportation

 

 

 

During the testing process, all test data are recorded in real-time and entered into the system, creating a quality record for each unit that serves as the technical basis for equipment delivery. Technical personnel note that these routine tests are designed to identify potential equipment defects and ensure that every product meets the required factory technical specifications.

2026110311230017010
6aadfdd7-c2bc-4d2c-bbad-3a057c7be841
 

Jiangsu VKE Transformer Co., Ltd. specializes in the R&D and manufacturing of transformer equipment. Equipped with professional production and testing facilities, the company offers a product portfolio that includes oil-immersed transformers, dry-type transformers, pole-mounted transformers, and compact substations. Throughout the manufacturing process, the company strictly adheres to routine testing standards, verifying parameters-such as turns ratio, losses, insulation, and sealing-for every individual unit, with a commitment to providing reliable power transmission and distribution equipment for electrical engineering projects.

modular-1
One-stop Transformer Manufacturing Factory in China

We invite you to consult with us regarding transformers and complete electrical equipment, and to experience firsthand the transformative power they can bring to your business. With our high-quality solutions, you can unlock new opportunities for growth and success within the power industry.