
Recently, the testing center at Jiangsu VKE Transformer Co., Ltd. conducted comprehensive inspections-centered on partial discharge (PD) testing-on a batch of newly manufactured dry-type transformers. This procedure serves as a critical, routine step in the factory-acceptance process, ensuring that the equipment's performance metrics fall within specified requirements.
Technical Parameter
| Rated Capacity | 800kVA | Rated Voltage | 10/0.4kV |
| Product Code | CIBE13 | Number of Phases | 3 |
| Factory Serial Number | 2404084 | Frequency | 50Hz |
| Tapping Voltage | ±2 × 2.5% | Vector Group Designation | Dyn11 |
Production and Testing Workflow

Preparation of Materials

Core Fabrication

Coil Winding

Assembly

Vacuum drying

Testing

Packaging

Transportation

At the testing site, quality inspectors connect test cables to the high-voltage bushings of the transformer and link them to the testing equipment. The transformer-distinctive in its red casing-is positioned within the designated test area, while operators manage the process from a control console located behind an explosion-proof glass partition.
During the test, operators utilize an intelligent transformer testing system to oversee the procedure. Real-time data, including voltage levels and partial discharge (PD) waveforms, are displayed on the screen. In accordance with relevant technical specifications, the partial discharge level for dry-type transformers must be kept below 10 pC, with a background noise level of less than 5 pC. The system applies a specified voltage to the transformer and captures internal discharge signals, allowing inspectors to determine whether the product meets factory standards based on the data.

Focused on the Future
Creating Greatness
During the assessment of fundamental parameters, an intelligent integrated testing platform automatically collects and calculates data for winding resistance, voltage ratio, short-circuit impedance, and load losses. This data is uploaded to a quality traceability system and compared against design specifications. Should any values fall outside the permitted range, the product is routed into a re-inspection and rectification process.

In addition to partial discharge testing, the VKE testing center conducts a comprehensive range of factory acceptance tests on its products. For oil-immersed transformers, the quality inspection team performs dissolved gas analysis (DGA) on the insulating oil, as well as withstand voltage tests. Furthermore, products must undergo tank sealing and pressure-deformation tests to verify the integrity of their sealing structures.

In recent years, VKE has established an intelligent integrated testing center, incorporating automated inspection systems. The scope of testing encompasses dry-type transformers, oil-immersed transformers, compact substations, and related complete sets of equipment. All test data is integrated into the traceability system, serving as a basis for ongoing quality control.

The execution of these testing procedures is supported by VKE's robust manufacturing infrastructure and production capacity. Founded in 2003, Jiangsu VKE Transformer Co., Ltd. is a provincial-level high-tech enterprise. It operates two major production bases within the Haian High-tech Industrial Development Zone, spanning a total area of over 33,000 square meters, with an annual production capacity reaching 6,000 MVA. The product portfolio includes oil-immersed transformers, dry-type transformers, American-style and European-style compact substations, as well as complete sets of high- and low-voltage equipment.

One-stop Transformer Manufacturing Factory in China
VKE transformers are designed and manufactured in compliance with international and national standards, including IEC, GB and ANSI. They are utilized in commercial buildings, industrial facilities, new energy power plants, and infrastructure construction projects, with the company providing power transmission and distribution solutions to clients worldwide.
